Designed from the ground up as a companion to the GoPro HERO, the Solo Quadcopter from 3D Robotics features aerial imaging-specific flight modes including Cablecam mode and Follow Me. A quad-rotor configuration, flight stability and autonomous flying are enabled thanks to a twin computer flight control system. The flight controller relies on GPS for navigational coordinates, plus uses data from gyros, accelerators, and other sensors to keep the aircraft safely flying. The Solo is designed to be paired with the separately available Solo Gimbal, a 3-axis stabilizer compatible with the a GoPro HERO3+ or HERO4 action camera.
This is a ready-to-fly bundle, featuring a pre-bound transmitter (radio controller) that has been styled after a video game controller for more intuitive operation. In addition to dual joysticks for flying, it features dedicated dials for operating the optional Solo Gimbal. In addition to the transmitter, there is a mobile app for iOS and Android devices. The app provides full control over the aircraft, gimbal, and even the GoPro itself. A mount is provided so that you can mount your smartphone or tablet up to 8" directly to the transmitter.
A flight battery providing up to 25 minutes flying time as well as a charger are included. In addition, the included transmitter features its own dedicated battery.
"Smart Shot" Aerial Video Flight Modes
Lock the Solo onto a virtual cable between any two points in space - even at different altitudes. This allows you to create a linear tracking shot with the ability to pan and tilt the camera freely. Any deviation from the "cable" is automatically prevented. Additionally, the Solo can memorize your first and last frames and pan the camera between them - all you have to do is use one stick on the controller to move Solo up and down the cable
The Solo can automatically circle any subject of your choosing, keeping the camera pointed at the subject to capture an iconic "wrap-around" shot. You can adjust the circle's radius to get the exact frame you want, even midflight
With one touch Solo will fly up and away from you, keeping the camera centered on you so the scenery around you expands in a dramatic aerial pullout shot
In this mode the Solo with track a GPS-enabled mobile device. It can follow from behind, stay beside the subject, or fly ahead with the camera looking back
Dual Computer Flight Control System
The flight control system incorporates two computers, enabling advanced autonomous flying features such as Cable Cam and Follow Me. Additionally, splitting up the work across two computers reduces the likelihood of mechanical failure in flight for an even safer flying experience
Take off, land, and return home automatically. And if you panic, don't worry: There's the "pause" button - much like a video game
If you need to release the controls for a moment or wish to capture a static shot, simply press the "Pause" button for the Solo to hold in a fixed hover. When you're ready, just press "Pause" again to resume flying
This flying mode limits the range and altitude the Solo can fly. Typically, the maximum flight ceiling is restricted to less than 400' and the aircraft is limited to flying within a user-specified radius
Video Game-Style Controls
The transmitter (radio controller) features ergonomics inspired by video game controllers. This design is intended to make it easier for pilots just starting out to learn how to fly
Mobile App for iOS and Android
The full-featured app for iOS and Android puts total aircraft control at your fingertips. It allows you to operate the quadcopter itself, the Solo Gimbal (available separately), and even the GoPro. A mobile device holder is included for smartphones and tablets up to the size of the iPad mini
Not only does the app provide access to controls not available through the transmitter, it can also be used to operate the GoPro. Recording start/stop and select camera settings can be changed through the app
Note: This feature requires the separately available Tarot gimbal to act as an interface
Works with Solo Gimbal
The separately available Solo Gimbal allows you to mount a GoPro HERO3+ or HERO4 action camera while providing 3-axes of stabilization. The gimbal allows panning and tilting via controls on the Solo transmitter and also keeps the horizon of your shots level, unless otherwise desired
For live FPV monitoring in HD, there is a an HDMI port built into the transmitter. With it you can connect a monitor or FPV goggles
Accessory bays provide installations points for the option Solo gimbal as well as future upgrade components
This 3DR solo Drone comes complete with 2 extra battery's(more to come soon), Extra blades, Backpack and GoPro 4 Siliver. This drone has only been flying since April,
Tom has worked as a sound editor, supervising sound editor and Freelance picture editor. His sound - editing career span two decades in which he worked on major A-list features and TV shows like: “Clear and Present Danger”, “Independence Day”, “Start Track: Generations”, and “Dr. Quinn, Medicine Women” just to mention a few.
Tom also worked on several animation series like; “Dark Wing Duck”, “New Adventures of Winnie the Pooh” and “Teenage Mutant Ninja Turtles” among others as an assistant editor. He received Daytime Emmy Award for “Duck Tails” the TV series produced by Disney and starring Alan Young. He married an actress and comedian Pola Mazur and wrote the TV Pilot script “Polish Royalty and the Goat” based on her stand-up comedy, which became a successful Web- series. Tom is currently Executive Producer/Writer/Director/Editor of the series. Tom Began flying drones in February and fell in love with it. Fulfilling a childhood dream of being a pilot as well as using his creative Ariel photography and editing skills. Below is my IMDb Credits. These partial credits show my extensive knowledge of the film and TV industry.